Earthing & Grounding
 
COPPER BONDED EARTH ROD

Manufactured from high tensile low carbon steel by molecularly bonding 99.9% pure electrolytic copper, there earth rods conform to BS 4360 grade 43A. Each rod is treated with Benzoyl triozole derivatives to prevent oxidation of copper bonding. The threads are formed by roll threading process which ensure strength and maintain the molecularly bonded copper along the full length of the threads. The rods can be deep driven manually or by using power hammer.

Rod Dia mm Length mm Thread Dia
12.7 1200 9/16"
12.7 1500 9/16"
12.7 1800 9/16"
12.7 2400 9/16"
14.2 1200 5/8"
14.2 1500 5/8"
14.2 1800 5/8"
14.2 2400 5/8"
14.2 3000 5/8"
14.2 3600 5/8"
17.2 1200 3/4"
17.2 1500 3/4"
17.2 1800 3/4"
17.2 2400 3/4"
17.2 3000 3/4"
17.2 3600 3/4"
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
   
COUPLER HEAVY DUTY

KMP couplers are made of high grade material for higher strength with counted bore for protecting the rod threads from damage.

Thread Dia Length mm
9/16" 70
5/8" 70
3/4" 3600
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
DC TAPE CLIP

KMP Metallic DC Clips are used to secure the flat conductor to the building. It is recommended to use DC Clips at 1 Mtr. distance. The Tape fits into the clip and is secured by two countershunk screws. These clips can be fastened to the building by recommended csk woodscrew 1 1/2" x No 10 plugs.

Body - Gunmetal Screws - Naval Brass
BS EN 50164-1:2000 (5Nm.)

Condctor Size mm
25 x 3
25 x 6
30 x 2
31 x 3
31 x 6
38 x 3
38 x 6
50 x 3
50 x 6
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
PLATE TYPE TEST CLAMP

KMP Plate Type Test Clamps are used as T or straight through joints of tapes. These Test clamps can also used as disconnecting joint between the down conductors and the earthing system. The clamp is also suitable in heavy duty applications up to 26 x 12 Tape connections.

Body - Gunmetal Fasteners - Naval Brass, Silicon Bronze, Phosphor Bronze, SS
BS EN 50164-1 : 2000 (15 Nm.)

Max. Conductor Size mm
26 x 12
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
AIR TERMINAL BASE - TAPE

KMP AIR TERMINAL BASE TAPE used for fixing air rods onto the flat roof surfaces and to accommodate tape for the protection system. The threads are suitable for air rods.

Gunmetal

Thread Dia Max. Tape Conductor
16mm 30 x 6 mm
5/8" 30 x 6 mm
3/4" 30 x 6 mm
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
HEAVY DUTY CAST CABLE SADDLE

KMP Heavy Duty Cast Cable Saddle can be used in many application. These can be used as a support for 10mm dia. Air rod or as a Heave duty Clip for Round conductors. These can be used in conjunction with Glazing bar holdfast and Back plate holdfast stem.

Body - Gunmetal Screws - Naval Brass
BS EN 50164-1:2000 (5 Nm)

Conductor Size mm 2
35 - 50
70 - 95
120
150
185
240
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
OD TO CABLE CLAMP - TYPE 'G'

KMPclamps are used for joining earth rods to copper cables.

Body - Gunmetal, Bolts - Al Bronze, Phosphor Bronze and SS
BS EN 50164-1:2000 (12 Nm.)

Rod Dia mm Conductor Range mm2
12-7 16-70
14-7 16-70
17.2 35-95
20.0 50-150
25.0 70-185
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
TEE CLAMP

KMP Tee Clamps are suitable for forming tee joints of circular conductors.

Body - Gunmetal Fasteners - Silicon Bronze, Phosphor Bronze, SS
BS EN 50164-1 : 2000 (12 Nm.)

Conductor mm
8 dia. or 35 - 50 sq.
 
Next